Stainless Steel 310/310S Plates，SS 310/310S Sheets,Hot Rolled 310/310S Steel Plate

Stainless Steel 310/310s Sheets and Plates

Grade 310 Stainless Steel is designed for high-temperature service, combining excellent high-temperature properties with good ductility and weldability. It resists oxidation in continuous service at temperatures up to 1150°C, provided there are no reducing sulfur gases present. It can also be used for intermittent service at temperatures up to 1040°C.

Grade 310S (UNS S31008) is suitable for environments involving moist corrodents at temperatures lower than typical "high-temperature" service. The lower carbon content in 310S reduces its high-temperature strength compared to 310.

Both grades exhibit excellent toughness, even at cryogenic temperatures, although other grades are typically used in cryogenic environments.

Grade 310L is a variant with a maximum carbon content of 0.03%. It is sometimes used in specific corrosive environments, such as urea production.

Allianz Steel Group is a prominent manufacturer, trader, and supplier of a wide range of 310s Stainless Steel Plates. Their steel plates are designed with precision, conforming to international quality standards. Allianz Steel Group is an ISO 9001:2008 certified company.

They also offer ASTM A240 310s Stainless Steel Plate, which is cut to the customer's specifications and supplied with complete mill test reports. Custom lengths and widths up to 2000mm are available. Allianz Steel Group specializes in exports and can source hard-to-find grades and non-standard sizes to meet customer requirements. Their stock of ASTM A240 310s Stainless Steel Plate includes thicknesses ranging from 0.6mm up to 80mm, with widths of 1250mm, 1500mm, and 2000mm.

310/310s Stainless Steel Plate Range

310/310s Stainless Steel Plate Specification	ASTM A240 / ASME SA240
310/310s Stainless Steel Manufacturing Process	Hot Rolled (HR) / Cold Rolled (CR)
310/310s Stainless Steel Plate Grades	202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
310/310s Stainless Steel Plate Thickness	0.6 MM TO 80 MM THICKNESS
310/310s Stainless Steel Plate Width	1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
310/310s Stainless Steel Plate Length	2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
310/310s Stainless Steel Plate Surface Finish	2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available.
310/310s Stainless Steel Plate Coating	PVC coating Normal / Laser, Film: 100 micrometer, Color: black/white.
310/310s Stainless Steel Plate Other Testing	NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, etc.
310/310s Stainless Steel Plate Value Added Services	Gas Cutting / CNC Plasma Cutting / Profiling / Rolling / Bending / Sheet Metal Fabrication / Drill / Punch / Machining / Sand Blasting / Shot Blasting / Heat Treatment
310/310s Stainless Steel Plate Packaging	Loose / Carrate / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps
310/310s Stainless Steel Plate Shipment & Transportation	By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
310/310s Stainless Steel Plate Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

310/310s Stainless Steel Plate Chemical Compostion and Properties

Grade		C	Mn	Si	P	S	Cr	Mo	Ni	N	Grade
310	min. max.	- 0.25	- 2.00	- 1.50	- 0.045	- 0.030	24.0 26.0	-	19.0 22.0	-	310	min. max.
310S	min. max.	- 0.08	- 2.00	- 1.50	- 0.045	- 0.030	24.0 26.0	-	19.0 22.0	-	310S	min. max.

310s Stainless Steel Plate Mechanical and Physical Properties

Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Hardness
Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Rockwell B (HR B) max	Brinell (HB) max
310	515	205	40	95	217
310S	515	205	40	95	217

310s Stainless Steel Plates Physical Properties

Grade

Density (kg/m3)

Elastic Modulus (GPa)

Mean Coefficient of Thermal Expansion(μm/m/°C)

Thermal Conductivity(W/m.K)

Specific Heat 0-100°C (J/kg.K)

Electrical Resistivity (nΩ.m)

Grade

Density (kg/m3)

Elastic Modulus (GPa)

0-100°C

0-315°C

0-538°C

at 100°C

at 500°C

310 / 310S

7750

200

15.9

16.2

17.0

14.2

18.7

500

720

310 / 310S

7750

200

310s Stainless Steel Plate Available Other Grade

EN-standard Steel no. k.h.s DIN	EN-standard Steel name	SAE grade	UNS
1.4109	X65CrMo14	440A	S44002
1.4112	X90CrMoV18	440B	S44003
1.4125	X105CrMo17	440C	S44004
		440F	S44020
1.4016	X6Cr17	430	S43000
1.4408	G-X 6 CrNiMo 18-10	316	S31600
1.4512	X6CrTi12	409	S40900
		410	S41000
1.4310	X10CrNi18-8	301	S30100
1.4318	X2CrNiN18-7	301LN
1.4307	X2CrNi18-9	304L	S3043
1.4306	X2CrNi19-11	304L	S30403
1.4311	X2CrNiN18-10	304LN	S30453
1.4301	X5CrNi18-10	304	S30400
1.4948	X6CrNi18-11	304H	S30409
1.4303	X5CrNi18-12	305	S30500
	X5CrNi30-9	312
1.4841	X22CrNi2520	310	S31000
1.4845	X 5 CrNi 2520	310S	S31008
1.4541	X6CrNiTi18-10	321	S32100
1.4878	X12CrNiTi18-9	321H	S32109
1.4404	X2CrNiMo17-12-2	316L	S31603
1.4401	X5CrNiMo17-12-2	316	S31600
1.4406	X2CrNiMoN17-12-2	316LN	S31653
1.4432	X2CrNiMo17-12-3	316L	S31603
1.4435	X2CrNiMo18-14-3	316L	S31603
1.4436	X3CrNiMo17-13-3	316	S31600
1.4571	X6CrNiMoTi17-12-2	316Ti	S31635
1.4429	X2CrNiMoN17-13-3	316LN	S31653
1.4438	X2CrNiMo18-15-4	317L	S31703
1.4362	X2CrNi23-4	2304	S32304
1.4462	X2CrNiMoN22-5-3	2205	S31803/S32205
1.4501	X2CrNiMoCuWN25-7-4	J405	S32760
1.4539	X1NiCrMoCu25-20-5	904L	N08904
1.4529	X1NiCrMoCuN25-20-7		N08926
1.4547	X1CrNiMoCuN20-18-7	254SMO	S31254

310s Stainless Steel Plate Application

Automotive

Railway & Transport

Architecture, Building & Construction

Chemical & Petrochemical Industries

Pharmaceutical

Energy and Power

Oil and Gas Industries

Kitchenware and Food Processing Industries

Plumbing And Overhead Water Tanks

310/310s Stainless Steel Plate Specification	ASTM A240 / ASME SA240
310/310s Stainless Steel Manufacturing Process	Hot Rolled (HR) / Cold Rolled (CR)
310/310s Stainless Steel Plate Grades	202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
310/310s Stainless Steel Plate Thickness	0.6 MM TO 80 MM THICKNESS
310/310s Stainless Steel Plate Width	1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
310/310s Stainless Steel Plate Length	2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
310/310s Stainless Steel Plate Surface Finish	2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available.
310/310s Stainless Steel Plate Coating	PVC coating Normal / Laser, Film: 100 micrometer, Color: black/white.
310/310s Stainless Steel Plate Other Testing	NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, etc.
310/310s Stainless Steel Plate Value Added Services	Gas Cutting / CNC Plasma Cutting / Profiling / Rolling / Bending / Sheet Metal Fabrication / Drill / Punch / Machining / Sand Blasting / Shot Blasting / Heat Treatment
310/310s Stainless Steel Plate Packaging	Loose / Carrate / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps
310/310s Stainless Steel Plate Shipment & Transportation	By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
310/310s Stainless Steel Plate Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

Grade		C	Mn	Si	P	S	Cr	Mo	Ni	N	Grade
310	min. max.	- 0.25	- 2.00	- 1.50	- 0.045	- 0.030	24.0 26.0	-	19.0 22.0	-	310	min. max.
310S	min. max.	- 0.08	- 2.00	- 1.50	- 0.045	- 0.030	24.0 26.0	-	19.0 22.0	-	310S	min. max.

Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Hardness
Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Rockwell B (HR B) max	Brinell (HB) max
310	515	205	40	95	217
310S	515	205	40	95	217

Grade

Density (kg/m3)

Elastic Modulus (GPa)

Mean Coefficient of Thermal Expansion(μm/m/°C)

Thermal Conductivity(W/m.K)

Specific Heat 0-100°C (J/kg.K)

Electrical Resistivity (nΩ.m)

Grade

Density (kg/m3)

Elastic Modulus (GPa)

0-100°C

0-315°C

0-538°C

at 100°C

at 500°C

310 / 310S

7750

200

15.9

16.2

17.0

14.2

18.7

500

720

310 / 310S

7750

200

EN-standard Steel no. k.h.s DIN	EN-standard Steel name	SAE grade	UNS
1.4109	X65CrMo14	440A	S44002
1.4112	X90CrMoV18	440B	S44003
1.4125	X105CrMo17	440C	S44004
		440F	S44020
1.4016	X6Cr17	430	S43000
1.4408	G-X 6 CrNiMo 18-10	316	S31600
1.4512	X6CrTi12	409	S40900
		410	S41000
1.4310	X10CrNi18-8	301	S30100
1.4318	X2CrNiN18-7	301LN
1.4307	X2CrNi18-9	304L	S3043
1.4306	X2CrNi19-11	304L	S30403
1.4311	X2CrNiN18-10	304LN	S30453
1.4301	X5CrNi18-10	304	S30400
1.4948	X6CrNi18-11	304H	S30409
1.4303	X5CrNi18-12	305	S30500
	X5CrNi30-9	312
1.4841	X22CrNi2520	310	S31000
1.4845	X 5 CrNi 2520	310S	S31008
1.4541	X6CrNiTi18-10	321	S32100
1.4878	X12CrNiTi18-9	321H	S32109
1.4404	X2CrNiMo17-12-2	316L	S31603
1.4401	X5CrNiMo17-12-2	316	S31600
1.4406	X2CrNiMoN17-12-2	316LN	S31653
1.4432	X2CrNiMo17-12-3	316L	S31603
1.4435	X2CrNiMo18-14-3	316L	S31603
1.4436	X3CrNiMo17-13-3	316	S31600
1.4571	X6CrNiMoTi17-12-2	316Ti	S31635
1.4429	X2CrNiMoN17-13-3	316LN	S31653
1.4438	X2CrNiMo18-15-4	317L	S31703
1.4362	X2CrNi23-4	2304	S32304
1.4462	X2CrNiMoN22-5-3	2205	S31803/S32205
1.4501	X2CrNiMoCuWN25-7-4	J405	S32760
1.4539	X1NiCrMoCu25-20-5	904L	N08904
1.4529	X1NiCrMoCuN25-20-7		N08926
1.4547	X1CrNiMoCuN20-18-7	254SMO	S31254

Related Products

ADD TO CARTA

Stainless Steel 316 / 316L / 316Ti Sheets and Plates

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 4mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

ADD TO CARTA

Stainless Steel 304/304L/304H Sheets and Plates

Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 5mm-150mm, etc
Length :4.00mm-100mm, etc
Thickness :4 mm to 100mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

ADD TO CARTA

Stainless Steel 202 Sheets and Plates

Specification of Stainless Steel 202 Sheets and Plates
Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
Length : 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
Thickness : 0.6 MM TO 80 MM THICKNESS
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

ADD TO CARTA

Stainless Steel 253 MA Sheets and Plates

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

ADD TO CARTA

Stainless Steel 321/321H Sheets and Plates

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

ADD TO CARTA

Stainless Steel 309/309s Sheets and Plates

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

ADD TO CARTA

Stainless Steel 317/317L Sheets and Plates

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

ADD TO CARTA

Stainless Steel 347/347H Sheets and Plates

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.