GET A QUOTE

Inconel 718 Sheets and Plates

Inconel 718 Sheets and Plates

Inconel 718 Sheets and Plates

Products Description

Inconel 718 is a molybdenum, nickel, and chromium-based alloy that is specifically designed to offer excellent resistance to severe corrosive environments. It is known for its exceptional resistance to corrosion, oxidation, and high-temperature environments.One of the notable features of Inconel 718 is its ability to be hardened through high-temperature heating processes. This alloy can undergo a heat treatment process known as precipitation hardening or age hardening, which enhances its mechanical properties and increases its strength. This heat treatment process involves heating the alloy to a specific temperature range and then rapidly cooling it. The resulting microstructure provides improved strength and toughness to the material.The combination of corrosion resistance and high-temperature capabilities makes Inconel 718 a popular choice for a wide range of applications. It is commonly used in industries such as aerospace, oil and gas, chemical processing, and power generation. In these industries, Inconel 718 is utilized in components exposed to aggressive environments, high stresses, and elevated temperatures.

In summary, Inconel 718 is a molybdenum, nickel, and chromium-based alloy renowned for its resistance to severe corrosive environments. It can be hardened through a heat treatment process, which enhances its mechanical properties. This alloy is widely utilized in industries where corrosion resistance, high strength, and temperature resistance are essential requirements.

 

718 INCONEL SHEETS AND PLATES EQUIVALENT GRADES

STANDARD

UNS

WERKSTOFF NR.

AFNOR

GOST

OR

BS

JIS

EN

Inconel 718

N07718

2.4668

-

-

-

-

NCF 718

-

 

 

CHEMICAL COMPOSITION OF INCONEL 718 SHEETS AND PLATES

Grade

Ni

Fe

C

Mn

Si

Cu

Cr

S

Mo

Co

Al

Ti

Nb

718

50 - 55

-

0.08 max

0.35 max

0.35 max

0.3 max

17 - 21

.015 max

2.8 - 3.3

1.0 max

-

-

-

 

 

MECHANICAL PROPERTIES OF INCONEL 625/718

Grade

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

625

Psi – 135,000 , MPa – 930

Psi – 75,000 , MPa – 517

42.5 %

718

Psi – 135,000 , MPa – 930

Psi – 70,000 , MPa – 482

45 %

 

Inconel Alloy 718 Sheets and Plates Application Industries

 

Our Inconel 718 Sheets and Plates are used in a wide range of applications and various industries. Below are a few of them:

 

Below are a few of them:

Petrochemical Industry

Oil and Gas Industry

Chemical Industry

Power Plant Industry

Energy Industry

Pharmaceuticals Industry

Pulp & Paper Indusry

Food Processing Industry

Aerospace Industry

Refining Industry

STANDARD

UNS

WERKSTOFF NR.

AFNOR

GOST

OR

BS

JIS

EN

Inconel 718

N07718

2.4668

-

-

-

-

NCF 718

-

Grade

Ni

Fe

C

Mn

Si

Cu

Cr

S

Mo

Co

Al

Ti

Nb

718

50 - 55

-

0.08 max

0.35 max

0.35 max

0.3 max

17 - 21

.015 max

2.8 - 3.3

1.0 max

-

-

-

Grade

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

625

Psi – 135,000 , MPa – 930

Psi – 75,000 , MPa – 517

42.5 %

718

Psi – 135,000 , MPa – 930

Psi – 70,000 , MPa – 482

45 %

Related Products
Nickel 200/201 Sheets and Plates
ADD TO CARTA
Nickel 200/201 Sheets and Plates

Nickel Sheets and Plates Specification : ASTM B162 / ASME SB162
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Monel 400/K500 Sheets and Plates
ADD TO CARTA
Monel 400/K500 Sheets and Plates

Monel Sheets and Plates Specification : ASTM B127 / ASME SB127
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Inconel 600/601/625Sheets and Plates
ADD TO CARTA
Inconel 600/601/625Sheets and Plates

Inconel Sheets and Plates Specification : ASTM B168 / ASME SB168
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Incoloy 800/800H/800HT Sheets and Plates
ADD TO CARTA
Incoloy 800/800H/800HT Sheets and Plates

Incoloy Sheets and Plates Specification : ASTM B168 / ASME SB168
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 8000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Incoloy 825 Sheets and Plates
ADD TO CARTA
Incoloy 825 Sheets and Plates

Incoloy Sheets and Plates Specification : ASTM B168 / ASME SB168
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 8000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Hastelloy C22/C276 Sheets and Plates
ADD TO CARTA
Hastelloy C22/C276 Sheets and Plates

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Duplex Steel S31803/S32205 Sheets and Plates
ADD TO CARTA
Duplex Steel S31803/S32205 Sheets and Plates

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Super Duplex S32750/S32760 Sheets and Plates
ADD TO CARTA
Super Duplex S32750/S32760 Sheets and Plates

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.